New in

Liquid Elements T4000 V2 5 Inch Polisher

$230.00
Minus Plus

We've used pretty much all the polishers on the market over the years, and we're picky about the ones we like. 

This Liquid Elements polisher makes your work easier, not harder. The pads keep spinning under pressure, defects get cut in less passes, and the finish is as clean as it gets. A 5-inch backing plate is the most versatile and can handle all types of panels. 

It's comfortable to handle, vibration is low, and you can dial all the steps of your polishing process with its speed control dial. 

The Liquid Elements polisher is a great first polisher for enthusiasts, but we're also using it daily in our businesses, and it's been a workhorse.

How to Use It

  • Prime your pad with three to four pea-sized drops of your favorite hyperCLEAN polish.

  • Spread the product at low speed before working at the correct speed.

  • Keep the pad flat and let the orbit do the cutting.

  • Work small sections until the polish clears, then wipe away with a microfiber.

  • Inspect with a proper correction light before moving on.

Specifications

  • Orbit: 15mm

  • Backing Plate: 5 inch

  • Motor Power: 950W

  • Speed: 2,000–5,000 OPM

  • Cord: Detachable

  • Weight: 5.73 lbs

More details Right

Frequently asked questions

What is the cord length?

The 25ft cord gives you room to move around most cars without constantly unplugging or dragging an extension cord. That means faster, smoother work with less hassle.

How heavy is the polisher?

At 5.73 lbs, it’s light enough to use for extended polishing sessions without wearing out your arms. The balance and grip make it comfortable, even when working on vertical panels.

Is this a good first polisher for beginners?

Yes. The Liquid Elements polisher is simple to control, low in vibration, and forgiving if you’re just getting started. The 15mm orbit and 5-inch plate make it versatile enough for any panel without being overwhelming.

Can professionals use this daily?

We do. This machine has proven itself in our businesses as a true workhorse. It keeps pads spinning under pressure, cuts defects fast, and finishes clean—qualities pros demand every day.

What polish and pads should I pair with it?

Start with three to four pea-sized drops of your favorite hyperCLEAN polish. Match your pad to the job—cutting pad for defects, polishing pad for refinement. Keep the pad flat and let the orbit do the work.